All of our Engineered plank floors can be either floated on to a dry sub-floor using our premium underlay or stuck down using our Polymer adhesive. If you are floating our Tongue and Groove floors then you must glue the joints using regular PVA wood flooring adhesive. We strongly advise that all our engineered herringbone floors be stuck down using our Mapei adhesive. We recommend leaving a 15mm expansions gap around the edges to allow for movement. For more information on how to lay these floors please download our guide in the guide section.
/NEW ACCESSORIES/SILVER UNDERLAY-400x400.jpeg "3mm Premium Underlay")
/NEW ACCESSORIES/FOAM UNDERLAY-400x400.jpeg "2mm Basic Foam Underlay")
/NEW ACCESSORIES/STAUF-pva-750ml-400x400.jpeg "Stauf PVA Adhesive")
/NEW ACCESSORIES/STAUF POLYMER-400x400.png "Stauf Multilayer Contract Glue")
/Screenshot 2020-06-13 at 14.50.56-400x400.png "Solid Oak Semi-Ramp Threshold Unfinished")
/Screenshot 2020-06-13 at 14.51.17-400x400.png "Solid Oak Ramp Threshold Unfinished")
/Screenshot 2020-06-13 at 14.50.26-400x400.png "Solid Oak Twin Threshold Unfinished")
/Screenshot 2020-06-13 at 14.49.41-400x400.png "Solid Oak End Threshold Unfinished")
/Screenshot 2020-06-13 at 15.03.03-400x400.png "Solid Oak Scotia Beading Unfinished")
/Screenshot 2020-06-13 at 15.00.42-400x400.png "Solid Oak Radiator Pipe Covers Unfinished (Pair)")
/Screenshot 2020-06-13 at 15.05.19-400x400.png "Solid Oak Step Nosing Unfinished")
